WallBox - CPK Automotive

Corporate Group

CPK AUTOMOTIVE

SYSTEMS FOR A CLEANER FUTURE

WallBox for your electric car

No matter which electric car you prefer our WallBox provides an easy charging experience. From simple installation process, user friendly interface, IP54 protection class, to several user access solutions and online control options. Choose the eCharger model that fits your needs, add our smartly designed accessories and enjoy the advantages of e-mobility to the fullest! Customized design with your logo is possible on request.

Simple but effective charger with Type 2 socket or 5 meters long cable with Type 2 plug. There are two available power options (11 kW and 22 kW) to choose from depending on your car or house grid capabilities.
Charger Easy is designed for single household use. Just plug in and charge, no user management available for this model. All Easy models have a color display showing the charging status, time, power and consumption as well as notifications.

WallBox - Connected

A smart charger with user authentication, RFID and load balancing if several chargers are connected in one line. Also allows to adapt the power to the electrical grid conditions.
These models are up to 22 kW with Type 2 socket or 5 meters long cable and Type 2 lug. The owner can adjust max charging power in a web application if needed.
WallBox Connected provides user management with up to 128 user accounts with 2 RFID cards per user. You can see each user’s charging patterns and get full overview of the charging history and export it as a PDF file.

Flyer Idle Control
» Flyer

Charging Power up to 22 kW: One to three phase grid connection up to 32 A
Easy Installation: Only few screws needed, electricity cable input possible from three different directions
Color Display: Shows charging status, time, charging power, consumption and notifications
IP54 Protection: Protected from dust ingress and water spray
Protected Power Supply: Robust power pack with internal protection and filter device
Certified: CE, RoHS, WEEE, IEC

Easy S 11 kW

Easy C 11 kW

Easy S 22 kW

Easy C 22 kW

Connected S 22 kW

Connected C 22 kW

Wallbox Accessories

Easy S 11 kW

Simple but effective charger with Type 2 socket. Charger Easy is designed for single household use. Just plug in and charge.

Technical data

Article-No.: 60001S
Max. Charging power: 11 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 16 A
Installation cable: Min. 2,5 mm²
Mains frequency: 50 Hz
Connection type: Socket
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 3,0 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

Easy C 11 kW

Simple but effective charger with Type-2-cable. Charger Easy is designed for single household use. Just plug in and charge.

Technical data

Article-No.: 60002S
Max. Charging power: 11 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 16 A
Installation cable: Min. 2,5 mm²
Mains frequency: 50 Hz
Connection type: 5m cable
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 5,2 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

Easy S 22 kW

Simple but effective charger with Type-2-socket. Charger Easy is designed for single household use. Just plug in and charge.

Technical data

Article-No.: 60003S
Max. Charging power: 22 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 32 A
Installation cable: Min. 6 mm²
Mains frequency: 50 Hz
Connection type: Socket
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 3,0 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

Easy C 22 kW

Simple but effective charger with Type-2-cable. Charger Easy is designed for single household use. Just plug in and charge.

Technical data

Article-No.: 60004S
Max. Charging power: 22 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 32 A
Installation cable: Min. 6 mm²
Mains frequency: 50 Hz
Connection type: 5m cable
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 6,3 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

Connected S 22 kW

A smart charger with user authentication, RFID and load balancing if several chargers are connected in one line. Also allows to adapt the power to the electrical grid conditions. These models are up to 22 kW with Type 2 socket. The owner can adjust max charging power in a web application if needed. WallBox Connected provides user management with up to 128 user accounts with 2 RFID cards per user. You can see each user’s charging patterns and get full overview of the charging history and export it as a PDF file.

Technical data

Article-No.: 60005S
Max. Charging power: 22 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 32 A
Installation cable: Min. 6 mm²
Mains frequency: 50 Hz
Connection type: Socket
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 3,0 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

Connected C 22 kW

A smart charger with user authentication, RFID and load balancing if several chargers are connected in one line. Also allows to adapt the power to the electrical grid conditions. These models are up to 22 kW with Type 2 5 meters long cable and Type 2 plug. The owner can adjust max charging power in a web application if needed. WallBox Connected provides user management with up to 128 user accounts with 2 RFID cards per user. You can see each user’s charging patterns and get full overview of the charging history and export it as a PDF file.

Technical data

Article-No.: 60006S
Max. Charging power: 22 kW
Input voltage: 230 V (1 ph) / 400 V (3 ph) AC
Rated current: 32 A
Installation cable: Min. 6 mm²
Mains frequency: 50 Hz
Connection type: 5m cable
Connector plug: Type 2
Charging mode: 3
Housing dimensions: 266 x 411 x 137 (Wx H x D in mm)
Net weight: 6,3 kg
Cable entry: top, bottom, rear
IP protection class: IP54
Mechanical impact class: IK08
Surge protection 61010-1: CAT III
IEC protection class: I
Operating temperature: -25 °C to +40 °C
Max. humidity: 95 %
Max. altitude: 2000m
Certificaions: CE; RoHS; REACH; IEC 6100-6-1/61000-6-3; IEC 61851-10; IEC 62196; IEC 62955

Additional:
2,4“ inch color display, accoustic error warning, DC fault detection 6 mA DC

WallBox - Accessoires

Accessoires:

type 2 cable

Typ-2-Charging cable 5m or 7,5m
Available as 11-kW- or
22-kW variant.

wall holder

Charging cable plug holder
Mount the holder to the surface
with 3 screws and conveniently
place the charging cable plug.

RFID Karte

RFID Card
as additional card or spare part.

We use cookies on our website. However, non-essential cookies (e.g. tracking cookies) are only set if you consent to their use. We point out that in connection with these cookies, your personal data may be transferred to US service providers and merged with other personal data. In the case of data transfers to the USA, there is a risk that this data will be accessed by US authorities without notification and without any legal remedy. With your consent, you also agree to this data transfers to the USA. For more information on the cookies we use, their purposes and storage periods, please refer to our privacy notice a: www.cpk-automotive.com/en/data-protection.

Ok Decline